HP2-964 -
HP Certified Professional - Installation & Service of HP ProCurve Devices(tests, practice exams, certification, certificate, questions ...)
21.)You have been called to a new customer site to move an HP ProCurve Routing Switch 9304m from another location to this site. The administrator of the new site wants to reset the switch to its default configuration but does not have the password. What can be done to reset the configuration without knowing the super-user-password?
A. the "Clear" button
B. the "Reset" button
C. the boot monitor utility
D. a one-time password supplied by the response center
22.)The response center determines that a customer's 4108gl switch needs to be replaced. How can the customer's existing switch settings be preserved? Select TWO.
A. At the switch's CLI, perform the "copy config" command and specify a TFTP server to save the file.
B. Copy the configuration from the "Diagnostics" tab in the web interface.
C. At the switch's CLI, perform the "copy startup-config" or "copy running-config" and specify a TFTP server to save the file.
D. Copy the configuration file to an FTP server.
E. Using your terminal emulator software, perform a "show startup-config" command, then copy and paste the output to a file on your laptop.
|
23.)You are installing a new module in an HP ProCurve Switch 5308xl. The new module requires a higher revision of software than is currently on the switch. Which type of server application can be used to load the new software from your laptop to the switch?
A. FTP
B. TFTP
C. HTTP
D. RADIUS
24.)You are troubleshooting an HP ProCurve 5304xl switch with the response center. To simplify the process by eliminating extraneous log messages, the response center has asked you to disable the Cisco Discovery Protocol. From the CLI, which command would you use to perform this task?
A. disable cdp
B. no cdp run
C. cdp disable
D. clear cdp
25.)You are troubleshooting an HP ProCurve 4104gl switch in a customer's data center. How can you ensure that you do not lose any error messages that are being generated by the switch? Send events to a(n) _________ server.
A. FTP
B. DNS
C. Syslog
D. TFTP
26.)You have been dispatched by the response center to a customer's data center to service the core switches in their network. Which HP ProCurve products are you most likely to find when you arrive? Select TWO.
A. HP ProCurve Switch 2524
B. HP ProCurve Switch 5372xl
C. HP ProCurve Switch 4000m
D. HP ProCurve Switch 2650-PWR
E. HP ProCurve Routing Switch 9315m
27.)You have been called in to perform a replacement on an HP ProCurve Switch 2650. When you arrive, you notice that the "Fault" and "Fan Status" lights are flashing. What is the most likely cause of this LED indication?
A. The switch has failed its self-test.
B. The cooling fan is no longer functional.
C. The external power supply has failed causing the fan to malfunction.
D. The switch is brand new and needs to have the most current firmware installed.
28.)You have been sent to troubleshoot connectivity issues on some HP ProCurve 5300xl Switches. The administrator tells you that some of his servers can only operate at full-duplex. You decide to force all of the ports connected to these servers to full-duplex.
How can you save the new configuration to non-volatile memory after the all ports are configured? Select THREE.
A. Issue the "save" command from the CLI.
B. Use the menu interface and select "Save".
C. Issue the "apply changes" command from the CLI.
D. Issue the "write memory" command from the CLI.
E. Use the menu interface and select "Write Memory".
F. Press the "Apply Changes" button from the Web interface.
G. Use the Web interface and press the "Write Memory" button.
29.)You have been sent to troubleshoot connectivity issues on some HP ProCurve 5300xl switches. The administrator tells you that some of his servers can only operate at full-duplex. You decide to force all of the ports connected to these servers to full-duplex.
How can you copy the new configuration to non-volatile memory after the all ports are configured?
A. copy start tftp
B. write memory
C. copy flash tftp
D. write config
30.)You are using the Web browser interface to troubleshoot network issues on an HP ProCurve Switch 4104gl. How can you get details on individual alert entries?
A. Copy the entry to a TFTP server.
B. Double click on the specific entry.
C. Copy and paste the entry into a notepad file.
D. Right click the specific entry and select details.
|
HP Certification, Microsoft Certification, Questions and Answers, Qestions & Answers, Braindumps, Test King,
IT Professionals, learning experience, Exam, APS, MSDN, Free, Servicing HP Dsktop,Wrkstations, and Ntbook, HP2-037 HP Certified Professional - HP LaserJet Foundations, HP2-038 HP Designjet Foundations, HP2-061 HP ProLiant Server Maintenance, HP2 035 061 060 HP2-896 Servicing HP Desktops, Workstations and Notebooks, APC Accredited Presales Consultant, AIS Accredited Integration Specialist, APP Accredited Presales Professional, APC Accredited Presales Consultant, ASE Accredited Systems Engineer, CSA Certified Systems Administrator, CSD, CSE, MASE Master Accredited Systems Engineer, MCSE Microsoft Certified System Engineer, MCP Microsoft Certified Professional, Microsoft Business Solutions, Microsoft 70-228 70-229 70-270 70-271 70-272 70-282 70-284 70-285 70-290 70-291 70-292 70-293 70-294 70-296 70-297 70-298 70-299 70-350 70-431 70-536 74-132
|