HOME NEW Certification
HOME OLD Certification
Certification HP
Certification Microsoft
HP Learning eBooks
 
 
CERTIFICATION - Questions and Answers at - TTr
Answers are somewhere on the web, just look carefully !!!
1 2 3 4 5
 

APS: HP Color LaserJet Printers LjCOLOR01

8.)To view the image being developed on the Transfer Drum of an HP Laserjet 8500DN, you would need to disable the right hand side Door Detection Interlock, the Laser Shutter (in the ITD cavity) and:
A. Remove the duplexer
B. Disconnect the formatter
C. Print a calibration page from Service Mode
D. Cover the Density sensar before printing a configuration page.

9.)If the Drum ground is not present on the Imaging Drum of the HP Color Laserjet 4500 printer, what do you expect the printed page to look like?
A. A black page
B. A white page
C. Sanding across the paper
D. Sanding down the paper.

 

10.)Where and what is the Control D used for?
A. Beginning of file marker ln PCL
B. Beginning of file marker ln PS
C. End of file marker in PCL
D. End of file marker in PS

11.)During the print cycle of an HP Color Laserjet 8500 a new image is formed, where ls the toner transferred to, after it has been placed on the Imaging drum?
A. Transfer drum
B. Paper
C. Transfer belt
D. None of the above

12.)An HP Color Laserjet 8500 ls printing on plain paper very slowly from tray 1 (approximately 3.2 pages per minute Instead of 24 pages per minute in monochrome). Which of the following could explain the reason for this?
A. In the control panel tray settings, tray 1 is set to TRANSPARENCIES when it should be set to PLAIN.
B. The paper used in tray 1 is llx17 or A3 size media
C. The printer ls a 220V unit plugged ln to a 110V outlet.
D. In the control panel tray settlngs, tray 1 is set to HEAVY PAPER when it should be set to PLAIN.

13.)The control panel of an HP Color Laserjet 4500 displays REINSTALL TRANSFER BELT but the Transfer Belt is already replaced. What is the next loglcal thing to do?
A. Replace the sensar PS5.
B. Replace the printer's Main Drive motor Ml.
C. Check middle-front drawer contactars
D. Replace the Intermediate Transfer Belt Drawer.

14.)The Quick Set option of the HP Color Laserjet 8550 allows the user to:
A. Store a job
B. Use Proof and Hold
C. Specify settlngs for reca II
D. Speed up the print engine

15.)The FM3 fan ln the HP Color Laserjet 4500 printer ls located ln the:
A. Upper, right, rear corner of the printer.
B. Upper, rear, left corner of the printer.
C. Front, center, of the upper front drawer of the printer.
D. Front corner of the upper right drawer of the printer.

16.)If Photosensar PS2 ls blocked, which error message would you expect to see on the control panel of the HP Color Laserjet 4500 printer?
A. TRANSFER KIT LOW
B. 13.7 PAPER JAM
C. 13.0 PAPER JAM
D. Close top cover.

 
 
 
 
 
 

HP Certification, Microsoft Certification, Questions and Answers, Qestions & Answers, Braindumps, Test King, IT Professionals, learning experience, Exam, APS, MSDN, Free, Servicing HP Dsktop,Wrkstations, and Ntbook, HP2-037 HP Certified Professional - HP LaserJet Foundations, HP2-038 HP Designjet Foundations, HP2-061 HP ProLiant Server Maintenance, HP2-896 Servicing HP Desktops, Workstations and Notebooks, APC Accredited Presales Consultant, AIS Accredited Integration Specialist, APP Accredited Presales Professional, APC Accredited Presales Consultant, ASE Accredited Systems Engineer, CSA Certified Systems Administrator, CSD, CSE, MASE Master Accredited Systems Engineer, MCSE Microsoft Certified System Engineer, MCP Microsoft Certified Professional, Microsoft Business Solutions, Microsoft 70-228 70-229 70-270 70-271 70-272 70-282 70-284 70-285 70-290 70-291 70-292 70-293 70-294 70-296 70-297 70-298 70-299 70-350 70-431 70-536 74-132