HOME NEW Certification
HOME OLD Certification
Certification HP
Certification Microsoft
HP Learning eBooks

3.) You are attempting to install a computer called WIN2Ksales1 into the TestCorp.com domain. When you attempt to join the domain, you get an error that the domain can't be located. Which of the following options must be configured and running in your domain? Choose two answers.
A. A PDC
-B. A domain controller
-C. A DNS server
D. A WINS server

4.) Your computer is configured with two hard drives. On disk 0, you have decided to configure logical drive C:. On disk 1, you have decided to configure logical disk D:. You want to run Windows 98 for backward compatibility with some applications that will not run under Windows 2000. However, you also want to run Windows 2000 Professional to take advantage of the Windows 2000 features. On drive D:, you want to store files that should have a high level of security. You will install Windows 98 on drive C: and Windows 2000 Professional on drive D:. How should the drives on this computer be configured?
A. Configure both logical drives as FAT32
B. Configure both logical drives with NTFS
-C. Configure logical drive C: as FAT32 and logical drive D: as NTFS
D. Configure logical drive C: as NTFS and logical drive D: as FAT32

5.) You install Windows 2000 Professional using the typical settings. After you start the computer, you realize that you can't see any other computers on the network. The network is using the TCP/IP protocol. What is the most likely problem?
A. You have not installed Client Services for Microsoft.
B. You have not installed File and Print Sharing for Microsoft Networks.
C. You have not installed the TCP/IP protocol stack.
-D. There was no DHCP server to allocate an IP address, and your IP settings have not been configured.

6.) You have a computer that will dual-boot between Windows NT 4 and Windows 2000 Professional. Which of the following statements reflects proper configuration?
-A. You should turn off disk compression on the Windows NT 4 configuration.
B. You should enable dynamic disks on the Windows 2000 Professional configuration.
C. You should install both operating systems into the same Windir directory so you will be able to access applications under both operating systems.
D. You should edit the Registry on the Windows 2000 computer for HKEY_LOCAL_MACHINE\DualBoot to a value of 1 so that you will be able to access applications under both operating systems.

7.) You have a computer that is on the HCL. The hard drive was erased and you are unable to access the CD-ROM drive. Where can you find the 32-bit command to create the Windows 2000 Professional Setup Boot Disks on the Windows 2000 Professional CD? The computer that will create the disks is already running Windows 2000 Professional.
A. \I386\MAKEBOOT
B. \I386\MAKEBT32
C. \BOOTDISK\MAKEBOOT
-D. \BOOTDISK\MAKEBT32

8.) You want to be able to install Windows 2000 Professional over the network. What folder must be copied from the Windows 2000 Professional CD?
A. \$OEM$
-B. \I386
C. \Intel
D. \$WINI386

9.) What steps should you take if the computer does not recognize your network interface card? Choose three answers.
-A. Make sure the network card is on the HCL.
B. Check to see if the network card is Plug-and-Play compatible or if it needs to be manually configured.
-C. Make sure the network card is compatible with the other network cards on the network.
-D. Make sure you have the latest driver for the network card.

10.) You are in the process of troubleshooting a Windows 2000 Professional installation. You want to verify all of the actions that were taken during the Setup phase. Where can you find a log file that will tell you this information?
A. \Windir\verify.log
B. \Logfiles\verify.log
-C. \Windir\setupact.log
D. \Logfiles\setup.log

11.) What types of files can be used with Windows Installer packages to create customized application installations that include specific application features?
A. MSI files
B. ZAP files
C. ZAW files
-D. MST files

12.) Which of the following operating systems can be upgraded to Windows 2000 Professional? Choose all that apply.
A. Windows NT Workstation 3.5
-B. Windows NT Workstation 3.51
-C. Windows NT Workstation 4
-D. Windows 95

13.) Which of the following operating systems offers the smoothest upgrade to Windows 2000 Professional?
A. Windows 95
B. Windows 98
-C. Windows NT Workstation 4
D. Windows NT Server 4

14.) Which of the following options cannot be upgraded from Windows 95 to Windows 2000 Professional? Choose all that apply.
A. Any applications that run under Windows 95 and are not specifically written for Windows 2000 Professional
-B. Third-party drivers that support compressed drives
-C. Third-party applications that use virtual device drivers (VxDs)
-D. Any custom power-management solutions or tools

15.) Which command is used to start an upgrade to Windows 2000 Professional from a Windows 95 computer that does not have auto-run enabled?
A. WIN2K
B. INSTALL
C. WINNT
-D. WINNT32

16.) Which command is used to start an upgrade to Windows 2000 Professional from a Windows NT 4 computer?
A. WIN2K
B. INSTALL
C. WINNT
-D. WINNT32

17.) Which option is used to tell applications that were previously installed how to be configured so that they will work with Windows 2000 Professional after an upgrade?
A. DLL packs
-B. Upgrade packs
C. Application packs
D. UPG packs

18.) How much memory is required on a Windows 95 computer that will be upgraded to Windows 2000 Professional?
A. 16MB
B. 32MB
-C. 64MB
D. 128MB

19.) Which of the following partitions will Windows 2000 recognize during an upgrade? Choose all that apply.
-A. FAT16
B. HPFS
-C. NTFS
-D. FAT32